The homeowners love the coziness of wood flooring, but they also hate the dings, gouges, nicks, scrapes, and scratches that come along with it. But what if we, “Just Tile It,” were to tell you that it is possible to have a classic look of hardwood flooring with the durability of a tile? Using imitation wood tiles, we can provide you with the best wall and floor tile services in Sydney.
The wood look tile flooring does not absorb moisture like traditional wood floors do, because they are made from ceramic or porcelain tiles. This means that it won’t crack, expand, stain, or warp anymore.
We agree that hardwood floors look beautiful, but they are not necessarily the most resilient. They are very susceptible to damage. Under normal daily wear and tear, these floors have been known to chip, scratch, and dent.
If your house is full of real hardwood floors, then you know that you need to reseal and refurbish it every few years. If you go for wood-looking tiles, then it eliminates the need for expensive maintenance as well as regularly cleaning the wood floor.
We recommend that you use imitation wood floors as floors in rooms with high humidity (such as bathrooms and kitchens). But, if we installed hardwood flooring in the bathroom, that would not take very long before it was warped as well as damaged. Even if you try, it is still difficult to damage the shingles. With a lifespan of 30 years, they probably will stay in the house much longer than the residents of the house.
If you can’t find your favorite title among the thousands of different imitation wood-grain tiles on the market, you can make your tile. There are a variety of colors, sizes, textures, and styles to choose from, and you can customize the floor to fully meet your needs.
Currently, in the market, there are very few flooring options that require little maintenance like wood-grain tiles. Hardwood floors require special care, but artificial wood floors do not require any special cleaning tools or help.
You only need water to clean the wood grain tiles. However, if you consider mixing all chemical cleaning products and then using them, then your wood grain tiles will also work. Irritant or acidic cleaning products will not damage wood grain tiles.
We know that natural wood is a renewable resource, but this does not mean that it is fast. It can take up to 25 years for a tree to fully mature before it can be cut down and used for flooring. This may lead to a large area of partial deforestation for decades, which may lead to an increase in air pollution rates.
The water that is running inside your home is coming from municipal water and water pipes. Many minerals get dissolve in the water, such as magnesium, limestone, and calcium.
The higher the concentration of these elements, the harder your water will be. When this water evaporates, the water vapor will settle on the surface and leave a very thin coating of magnesium and calcium. As those droplets dry, you can see a faint, white ring of crystals that are left.
When the water on the floor dries, another layer of these new crystals is on top of the old crystals. If your mineral water has a high iron content, then it will leave a red slime. Due to the acid content in your water supply, your brass or copper fixtures will produce blue-green rust.
Since hard water deposits are alkaline, it is difficult to dissolve them in soap. One easy way is to use abrasive cleaners. Here are our suggestions.
1. WHITE SOLUTION OF VINEGAR
You can place white vinegar in a plastic spray bottle and then spray it on your dry walls. Leave it for an hour or two. Then, you can rinse it with water and hand dry it.
2. SCRUBBING BAKING SODA
You must mix baking soda with water to make a paste, and then cover the spots with the paste. After that, you can sprinkle vinegar on it until it starts to bubble. You should gently scrub the paste to remove soft spots, rinse and dry them.
If your stain still does not disappear, repeat these methods until the stain is clean and there is no risk of damaging the tiles.
If you feel cleaning won’t help, then call “Just Tile It.” We specialize in porcelain tiles, wall tiles, ceramic tiles, and many more. Call us for the first-class service. Get in touch today with one of our Wall & Floor Tiling experts in Sydney or just fill the form up and we will get back to you ASAP.